Sinorock® has domed anchor nut and hex anchor nut.

Office hours(GMT+8): 8:30-18:00

sinorock@sinorockco.com

86-379-65287220

86-379-65179771

No.1703, Building 3, No. 1 Fenghua Road,High-tech,District , Luoyang , China (Henan)Pilot Free Trade Zone, Henan Province, P.R. China.

Home > Product > Self Drilling Anchor Bolt System > R Thread Anchor System > Anchor Nut

Anchor Nut

Sinorock has domed nut and hex nut, which can be used for both doomed plate and flat plate.

Description

Introduction:

Sinorock has domed nut and hex nut. The domed nut has chamfered edge on one end. The hex nut has chamfered edges on both ends. Both of them are made of steel to suit the anchor bar and anchor plate.

Characteristic:

1. It can be used for both doomed plate and flat plate.

2. All nuts exceed the ultimate strength of the self drilling anchor bar.

3. It can meet the stringent demands on anchor specification.

4. Hot dip galvanizing for corrosion protection.

Hex Nut

Size	Key Size (mm)	Length (mm)	Weight (Kg/pc)	Note
SSR25	41	30	0.20	Heat treatment
SER25	41	35	0.23	Without heat treatment
SSR32	46	45	0.37	Heat treatment
SSR32	46	55	0.46	Heat treatment
SER32	46	45	0.37	Without heat treatment
SSR38	50	60	0.47	Heat treatment
SSR38	50	70	0.55	Heat treatment
SER38	50	60	0.47	Without heat treatment
SSR51	75	70	1.53	Heat treatment
SSR51	75	80	1.84	Heat treatment
SER51	75	70	1.53	Without heat treatment

Domed Nut

Size	Key Size (mm)	Length (mm)	Weight (Kg/pc)	Note
SER25	41	40.5	0.31	Without heat treatment
SSR32	46	45	0.38	Heat treatment
SER32	46	45	0.38	Without heat treatment
SSR38	52	60	0.61	Heat treatment
SER38	52	60	0.61	Without heat treatment
SSR51	75	70	1.60	Heat treatment
SSR51	75	80	1.92	Heat treatment
SER51	75	70	1.60	Without heat treatment